I have tried several designs, new tape and changed settings. I can not get any design to stick to the plate. Help please
Ditto Pro and Octaprint
1) What flavor of G-Code are you using?2) Are you using Marlin as your firmware?3) Are you able to use Octaprint on the Ditto Pro4) Has anyone put on a heated bed onto the Ditto Pro?
Hi Everyone,We've got an exciting announcement to share with you today! For those that are familiar with Tinkerine filament, you know that for years, we’ve dedicated ourselves to providing a PLA-based filament line with a strong focus on purity, safety, and reliability. We’ve spent much R&D hours fine-tuning our filament to work well with our Ditto Series FFF 3D printers. We’ve also set out to..
Most of prints are warping. We are using painters tape on the glass and our prints are still warping. We have three printers and happens regularly on all three and always on the back corners of the bed. Can you please share best practices for printing on the glass surface and avoiding warped prints.
Ventilator Splitter Resea..
With the face shield V8 at a place where we are getting evaluation. I'm going to start putting information here for a ventilator splitter design.A quick research has come up with a fact that ventilators are NOT supposed to be used at a ratio of 1:Many. There are things to consider such as different lung capacity, different illnesses each patient may have so contamination and etc. These are under n..
Tinkerine Error when slic..
Hello all, I've had a persistent problem when trying to slice larger files, which throws a '3D Window Error': I've attached a picture here. Any idea what's causing this or possible work arounds?
Does anyone know the gant..
Hi everyone. Sorry if this was already covered, but does anyone know the gantry height for the DittoPro?Thanks!
Dev Updates (3/29)
Hi everyone! The team here has done a bunch of neat things on Tinkerine U since the last developer update so let's break down the new features we've been working on!CONTENTWe've continued to add content to our existing Learn portion of Tinkerine U. New Courses, Challenges, and Experiments are available for you to expand your 3D printing knowledge. Check them out!CERTIFICATIONWe also introduced a t..
Weight of empty spool?
Trying to figure out what I have left on a few of my spools and was wondering what the empty spools weigh.
3D pen done right.
For those wondering how to apply 3D pens in the right way. Looks like a lot of fun work!
Why do large prints curl?
Does anyone have the problem where when you're printing something very big (as big as the print bed), the print on the sides start to curl up? Does it have to do with leveling or do I need to change the tape? It seems to only happen to large prints.
Everyday 3D printing uses
What kind of things have you printed for everyday use? For me, I find my printer handy for making (last-minute!) custom gifts for my friends and family. I'll often print something as a extra item to include with another gift. For example, I printed my sister a large 48 pencil-crayon holder for her desk, and for my brother I printed a lithopane of a Magic Card he liked. It's pretty cool when you ho..
Tinkerine U development u..
WelcomeHi everyone, welcome to the new Tinkerine U! We hope you're here to stay as we embark on this new journey.Through the last two years, we've worked with a lot of teachers and institutions to really home in on what educators expect from a learning platform. A recurring problem that we kept seeing was that even if a teacher or student was to receive a 3D printer today, most of them would be lo..
How good are clay printer..
Keith from Emily Carr was showcasing a pneumatic clay printer at Vancouver Makerfaire 2016. The printed clay models were heavy and would collapse on itself. How do we improve this technology? Let's hear it.
© 2021 Tinkerine Studios Ltd. All rights reserved.